A

  • Abazari, َAmir Mosa Analytical Study of Mutual Inductance for Arbitrary Positioned Planar Spiral Inductors for Airborne Electromagnetic Systems Applications [(Articles in Press)]

  • Abbasi, yosef Investigation of Thermal Control Methods in Small Scale Satellites [Volume 5, Issue 4, 2022, Pages 23-34]

  • Abbaszadeh Tehrani, Nadia Monitoring the Quality of Water BodiesUsing Satellite and Aerialand satellite imagery Remote Sensing Imagery (Concepts, Methods and New Approaches) [Volume 2, Issue 3, 2019, Pages 1-11]

  • Abdollahi azghan, Mehdi Fabrication and Investigation of Mechanical Properties Aluminum Composite Foam Reinforced with Silicon Carbide Prticles [(Articles in Press)]

  • Aboutalebiyan, Ali Robust H∞ Control Design for Thrust Vectoring System of a UAV [Volume 6, Issue 1, 2022, Pages 17-28]

  • Adami, Amirhossein Evaluation of Multidisciplinary Design Optimization of Air Taxi and Classic Design [Volume 7, Issue 3, 2023, Pages 13-24]

  • Aghabeigi, Amir Study of Emitted Sound of a Gas Turbine Model Combustor When Flame Adheres to Burner Head [Volume 5, Issue 1, 2021, Pages 57-65]

  • Aghaei Togh, Reza Improving the Aerodynamic Performance of Radial Gas Microturbine with Double Curvature Blades [Volume 4, Issue 4, 2021, Pages 21-30]

  • Aghaei Togh, Reza Analysis and identification of the flow pattern in a specific high-pressure axial turbine in off-design conditions [Volume 8, Issue 3, 2024, Pages 47-61]

  • Ahangarani Farahani, Alireza Two-Level Optimal Controller Design Based on PSO and Adaptive Control for Satellite Simulator System [(Articles in Press)]

  • Ahmadi, Marziyeh Improving the Aerodynamic Performance of Radial Gas Microturbine with Double Curvature Blades [Volume 4, Issue 4, 2021, Pages 21-30]

  • Ahmadi, Moein Investigation of Ground Effect on the Beamforming of the Glide Path Altitude Adjustment Navigation System [Volume 5, Issue 3, 2021, Pages 57-65]

  • Akbari Poorsalimi, Sharif Urban Growth Prediction using Sentinel Satellite Images by Neural Network Method [Volume 2, Issue 3, 2019, Pages 13-22]

  • Alami Rostami, Mehdi Design and Optimization of Two- stage AC/DC Power Supply Based on Increasing Reliability for Aircraft Power Supply [Volume 7, Issue 2, 2023, Pages 17-28]

  • Alemi Rostami, Mehdi Selecting the Microwave Amplifier for the Satellite Application [Volume 1, Issue 3, 2018, Pages 11-15]

  • Aliakbari, Ahmadreza Solar Orbiter; a Joint Mission of the European Space Agency (ESA) and the US –National Aeronautics and Space Administration (NASA) [Volume 2, Issue 1, 2018, Pages 45-56]

  • Aliakbari, Ahmadreza Program for Development of Rockets and Space Probes [Volume 2, Issue 3, 2019, Pages 53-65]

  • Aliakbari, Ahmadreza Human Spaceflight [Volume 2, Issue 4, 2019, Pages 43-53]

  • Alikhani, Alireza Introduction to Space Debris Capturing Methods [Volume 7, Issue 1, 2023, Pages 1-16]

  • Alimohammadi, Mohammad Evaluation of Kidane Approximate Model in Free Vibration Analysis of Grid Stiffened Composite Plates with Different Boundary Conditions [Volume 6, Issue 1, 2022, Pages 29-44]

  • Alizadeh, Ali Fabrication and Investigation of Mechanical Properties Aluminum Composite Foam Reinforced with Silicon Carbide Prticles [(Articles in Press)]

  • Alizadeh, Mohammad Hosein Designing Pitch Angle Compensator for an UAV and Robustification it with Bee Colony Optimization Algorithm [Volume 8, Issue 1, 2024, Pages 1-14]

  • Allaee, Mohammad Hossein Optimization of Milling Process Parameters of Carbon/Epoxy Composite Material for Minimizing Surface Roughness [Volume 5, Issue 4, 2022, Pages 35-59]

  • Aminaee, Ali The Introduction of Multi-Stage Turbocharger Systems used in Unmanned High-Altitude Flight [Volume 2, Issue 1, 2018, Pages 9-15]

  • Aminaee, Ali Methods for Preliminary Estimation of Turbofan Engine Weight [Volume 2, Issue 2, 2018, Pages 35-45]

  • Amiri, Ebrahim Challenges of Asteroid Mining from Techno-economic and Legal Points of View [Volume 5, Issue 1, 2021, Pages 1-13]

  • Amirkhani, Alireza Communication Space Bus in GEO [Volume 4, Issue 4, 2021, Pages 43-53]

  • Ansari, Reza Optimization of Milling Process Parameters of Carbon/Epoxy Composite Material for Minimizing Surface Roughness [Volume 5, Issue 4, 2022, Pages 35-59]

  • Ardebili, Amirreza A Review of Satellite Thermal Simulation Facilities in The Environmental Conditions of Earth's Orbits for Composite Structures [Volume 8, Issue 1, 2024, Pages 79-95]

  • Asadi, Mahdi Analytical Study of Mutual Inductance for Arbitrary Positioned Planar Spiral Inductors for Airborne Electromagnetic Systems Applications [(Articles in Press)]

  • Asdghpour, fateme Conceptual Design of a Navigation CubeSat for Local Positioning System (Iran Region), Based on COTS Approach [Volume 4, Issue 3, 2020, Pages 13-1]

  • Asghari, Saeed Investigating the Factors Affecting the Choice of Thermal Control Coatings in Satellite Radiators [Volume 2, Issue 1, 2018, Pages 35-44]

  • Atoof, Eisa Numerical Calculation Of Aerodynamic Loads Of Helicopter Rotor Using CFD / BET Method [Volume 6, Issue 4, 2023, Pages 13-24]

  • Ayar, Pooyan Endless Runway Design: A New Horizon in the Development of the Aviation Industry [Volume 5, Issue 2, 2021, Pages 57-69]

  • Ayati, sepideh Development process of aircraft turbine engine control systems [Volume 6, Issue 3, 2022, Pages 45-55]

  • Azarafza, Reza Free vibration analysis of cylindrical sandwich shells with FML face and functionally graded core using a new shell theory [Volume 7, Issue 4, 2024, Pages 35-49]

  • Azargoman, Majid An Algorithm, Based on Extreme Machine Learning, for Modeling Rate of Material Transfer in EDC Process [Volume 3, Issue 3, 2019, Pages 23-30]

  • Azimi, Farzane Astronauts and Space Food [Volume 1, Issue 3, 2018, Pages 31-40]

  • Azimi, Milad CubeSat Applications in Space Science and Explorations [Volume 3, Issue 1, 2019, Pages 41-55]

  • Azimi, Milad Review of Deployment Mechanisms for Space Structures [Volume 3, Issue 2, 2019, Pages 23-40]

  • Azimi, Milad Vibration Suppression of a Maneuvering Flexible Spacecraft with Actuator Dynamic [Volume 5, Issue 1, 2021, Pages 45-56]

  • Azimi, Milad Introduction to Space Debris Capturing Methods [Volume 7, Issue 1, 2023, Pages 1-16]

  • Azizi, Mehran Ali Conceptual Design of the Spacecraft Attitude Control Based on the Plane Displacement of the Propulsion System [Volume 2, Issue 4, 2019, Pages 27-35]

B

  • Babaei, Alireza Optimization of an Unmanned Aerial Vehicle Using Fuzzy Logic and Multidisciplinary Design Optimization [Volume 5, Issue 2, 2021, Pages 29-41]

  • Babaei, Hadiseh Monitoring the Quality of Water BodiesUsing Satellite and Aerialand satellite imagery Remote Sensing Imagery (Concepts, Methods and New Approaches) [Volume 2, Issue 3, 2019, Pages 1-11]

  • Bagheri, Nikrooz Unmanned Aerial Vehicles Without Combustion Engine Technical Parameters and Challenges [Volume 6, Issue 3, 2022, Pages 57-69]

  • Bahman-Jahromi, Iman Design and Fabrication of a Reflected-Type Shock Tube for Experimental Investigations on Combustion Kinetics [Volume 3, Issue 3, 2019, Pages 31-38]

  • Bahman-Jahromi, Iman Numerical and Analytical Study of Acoustic Liner Absorption Coefficient to Reduce Turbofan Engine Noise [Volume 5, Issue 2, 2021, Pages 11-18]

  • Bahonar, Hosna Study of Emitted Sound of a Gas Turbine Model Combustor When Flame Adheres to Burner Head [Volume 5, Issue 1, 2021, Pages 57-65]

  • Bahri rasht abadi, MohammadMehdi Investigation of Different Types of Reflective Multilayer Insulators (MLI) in Cryogenic Tanks [Volume 4, Issue 1, 2020, Pages 23-34]

  • Banitalebi Dehkordi, Mohammadreza A review of the application of optimization algorithms nature inspired in the design of flight paths [Volume 8, Issue 3, 2024, Pages 75-99]

  • Barati, M. Automatic Mass Balancing of Spacecraft Attitude Simulator by Parameter Estimation and Linear Control [Volume 8, Issue 2, 2024, Pages 55-65]

  • Barghamadi, Leyla An Overview of Aluminum Nitride (AlN) Based VUV Detectors in Space Applications [Volume 4, Issue 1, 2020, Pages 55-63]

  • Basohbate Novinzadeh, A. B. Optimal Technology Allocation of in the Life Support Subsystem with Maximum Reliability [Volume 7, Issue 2, 2023, Pages 29-37]

  • Bayanundi, Mohammad Autonomous Orbit Control: A New Approach in LEO Satellites [Volume 1, Issue 1, 2017, Pages 43-52]

  • Bayati, Morteza Investigation of Dynamic Loading Software on an Aircraft's Wing and Horizental Tail, by Elevator Deflection [Volume 3, Issue 3, 2019, Pages 15-22]

  • Bayati, Morteza Performance Evaluation of a Turbojet Engine by Exergy Analysis of its Components [Volume 5, Issue 2, 2021, Pages 19-27]

  • Bayram Ali Poor Geshlagi, Mohammad Reza Investigation of Different Types of Reflective Multilayer Insulators (MLI) in Cryogenic Tanks [Volume 4, Issue 1, 2020, Pages 23-34]

  • Beheshti birami, Hossain Implementation of LDUT-based redundancy and frame structure management in CAN bus space applications [Volume 8, Issue 1, 2024, Pages 67-77]

  • Beirami, Amir A model for equipment deterioration prediction in aviation industry using deep learning methods (case study: airplane turbofan engine) [Volume 8, Issue 2, 2024, Pages 1-12]

  • Berenjkoub, Mohammad Sadegh Investigating the Factors Affecting the Choice of Thermal Control Coatings in Satellite Radiators [Volume 2, Issue 1, 2018, Pages 35-44]

  • Borghei, MohamadAmin Design of cryogenic propulsion feeding system for second stage of special rocket Based on space standards [Volume 8, Issue 3, 2024, Pages 17-32]

  • Borzou Esfahani, Kamal Investigating the Factors Affecting the Choice of Thermal Control Coatings in Satellite Radiators [Volume 2, Issue 1, 2018, Pages 35-44]

C

  • Cheraghi Mahmudabadi, Vahid Challenges of Inertial and Integrated Navigation Systems in Synthetic Aperture Radar Application [Volume 4, Issue 3, 2020, Pages 24-15]

D

  • Darvishpour, Shahin Model Predictive Control Based on Intelligent Model for Low Earth Orbit Satellite [Volume 4, Issue 4, 2021, Pages 31-41]

  • Dashti gohari, Rokhshaad Simulation of Electro-osmotic Micro Pump Using Dissipative Particle Dynamics [Volume 3, Issue 2, 2019, Pages 1-9]

  • Dashti gohari, Rokhshaad Simulation of the Aerodynamic Performance of a Symmetrical Airfoil Using Dissipative Dynamic Particle Method [Volume 6, Issue 2, 2022, Pages 23-39]

  • Dastourani, Hadi Numerical and Analytical Study of Acoustic Liner Absorption Coefficient to Reduce Turbofan Engine Noise [Volume 5, Issue 2, 2021, Pages 11-18]

  • Davar, Ali Fabrication of Epoxy-date Fiber Composite with the Aim of Improving Mechanical Properties [Volume 5, Issue 3, 2021, Pages 21-36]

  • Davar, Ali Evaluation of Kidane Approximate Model in Free Vibration Analysis of Grid Stiffened Composite Plates with Different Boundary Conditions [Volume 6, Issue 1, 2022, Pages 29-44]

  • Davar, Ali Free vibration analysis of cylindrical sandwich shells with FML face and functionally graded core using a new shell theory [Volume 7, Issue 4, 2024, Pages 35-49]

  • Davoodabadi farahani, Zahra Investigation of Ground Effect on the Beamforming of the Glide Path Altitude Adjustment Navigation System [Volume 5, Issue 3, 2021, Pages 57-65]

  • Dehghani, Ali Frequency Analysis of Variable Stiffness Fiber-Metal Plates with Simply Supported Edges in the Longitudinal Direction under Thermal Load using Semi - Analytical Finite Strip Method [Volume 6, Issue 4, 2023, Pages 57-68]

  • Dehghan Menshadi, Safa Conceptual Design of a Navigation CubeSat for Local Positioning System (Iran Region), Based on COTS Approach [Volume 4, Issue 3, 2020, Pages 13-1]

  • Dehnavi, Mohammad Ali Technologies and New Methods for Determining the Burning Rate of Solid Propellants [Volume 3, Issue 1, 2019, Pages 57-67]

  • Dehnavi, Mohammad Ali The Role of Thrusters in Space Systems [Volume 3, Issue 4, 2020, Pages 11-24]

  • Djavareshkian, Mohammad Hassan Design and optimization of the wing fence of a lambda-shaped aircraft model to reduce the rolling moment coefficient [Volume 8, Issue 2, 2024, Pages 13-25]

  • Djavareshkian, Mohammad Hassan Investigating selected methods to improve aerodynamic coefficients and better performance of UAV [Volume 8, Issue 3, 2024, Pages 1-16]

E

  • Ebadi, Mohammad mehdi Evaluation of Multidisciplinary Design Optimization of Air Taxi and Classic Design [Volume 7, Issue 3, 2023, Pages 13-24]

  • Ebrahim abadi, Yahya Effect of DBTDL Cure Catalyst on Mechanical and Ballistic Properties of a Composite Igniter [Volume 4, Issue 1, 2020, Pages 1-6]

  • Ebrahim abadi, Yahya Effect of MAPO and T313 on the Rheological and Mechanical Properties of Composite Solid Propellant Based on HTPB [Volume 3, Issue 3, 2019, Pages 1-8]

  • Ebrahimi, Masoud Ride Quality & Passenger Comfort in Commercial Aircraft During Formation Flight [Volume 6, Issue 1, 2022, Pages 53-64]

  • Ebrahimi, Masoud An Overview of the Importance, Challenges, and Methods of Orbital Rendezvous and Docking [Volume 6, Issue 2, 2022, Pages 41-54]

  • Ebrahimi, Masoud An overview of rendezvous and docking space laboratories platforms [(Articles in Press)]

  • Ebrahimi, Mohammad Experimental Hypersonic Aerodynamics and Advances in Aerospace Engineering [Volume 1, Issue 1, 2017, Pages 1-10]

  • Edalatpour, Amirhossein An Investigation of Vertical Take-off and Landing Air Taxis with Electric and Hybrid Propulsion Systems [Volume 2, Issue 3, 2019, Pages 31-42]

  • Elahian, Samaneh Challenges and Opportunities of Drone Development in Iran [Volume 4, Issue 2, 2020, Pages 64-45]

  • Emami, Reza Technologies and New Methods for Determining the Burning Rate of Solid Propellants [Volume 3, Issue 1, 2019, Pages 57-67]

  • Esfandi, Mohsen Numerical Simulation of Unsteady Flow and Calculation of Heat Transfer Coefficient inside the Solid Fuel Engine Shell [Volume 8, Issue 1, 2024, Pages 27-39]

  • ESHAGHI, Hajar Space Adhesives: Fundamentals, Preparation, and Impact of Space Environment [Volume 5, Issue 4, 2022, Pages 73-88]

  • Eskandari, Majid Optimization of Milling Process Parameters of Carbon/Epoxy Composite Material for Minimizing Surface Roughness [Volume 5, Issue 4, 2022, Pages 35-59]

  • Eskandari, Muhammad Amin Design of cryogenic propulsion feeding system for second stage of special rocket Based on space standards [Volume 8, Issue 3, 2024, Pages 17-32]

  • ESKANDARI, SAIED Simulation of Aerodynamic Properties of Rarefied Gas Flow on Satellite Panel by DSMC Method [Volume 6, Issue 1, 2022, Pages 45-52]

  • Eskandari Jam, Jafar Fabrication of Epoxy-date Fiber Composite with the Aim of Improving Mechanical Properties [Volume 5, Issue 3, 2021, Pages 21-36]

  • Eskandari Jam, Jafar Optimization of Milling Process Parameters of Carbon/Epoxy Composite Material for Minimizing Surface Roughness [Volume 5, Issue 4, 2022, Pages 35-59]

  • Eskandari Jam, Jafar Evaluation of Kidane Approximate Model in Free Vibration Analysis of Grid Stiffened Composite Plates with Different Boundary Conditions [Volume 6, Issue 1, 2022, Pages 29-44]

  • Eskandari Jam, Jafar Free vibration analysis of cylindrical sandwich shells with FML face and functionally graded core using a new shell theory [Volume 7, Issue 4, 2024, Pages 35-49]

  • Eskandari Shahraki, Majid Fabrication of Epoxy-date Fiber Composite with the Aim of Improving Mechanical Properties [Volume 5, Issue 3, 2021, Pages 21-36]

  • Eskandari Shahraki, Majid Evaluation of Kidane Approximate Model in Free Vibration Analysis of Grid Stiffened Composite Plates with Different Boundary Conditions [Volume 6, Issue 1, 2022, Pages 29-44]

  • Esmaeili, Ali Effect of amplitude and wavelength of the sinusoidal leading edge of the tubercled wing in post-stall condition [Volume 6, Issue 4, 2023, Pages 47-56]

  • Esmaeili, Mostafa Trapped-Vortex-Combustor: a Novel Technology in the Gas Turbines [Volume 1, Issue 1, 2017, Pages 31-41]

  • Esmaeili, Mostafa Flutter analysis of a CNT-reinforced composite beam carrying an attached mass in the supersonic flow [Volume 7, Issue 1, 2023, Pages 57-67]

  • Esmaelzadeh, Reza Review of Re-entry Guidance Methods Based on Trajectory Generation [Volume 5, Issue 4, 2022, Pages 61-72]

F

  • Fakhralmobasheri, Navid Numerical Calculation Of Aerodynamic Loads Of Helicopter Rotor Using CFD / BET Method [Volume 6, Issue 4, 2023, Pages 13-24]

  • Falahat nia, Mahmood Modeling Reliability of UAV by Markov Method [Volume 6, Issue 4, 2023, Pages 1-12]

  • Fani saberi, Farhad Drag Sail Conceptual Design for Satellite Orbit Reduction in Low Earth Orbit [Volume 5, Issue 1, 2021, Pages 29-43]

  • Fani Sani, Abdellah Investigating the Factors Affecting the Choice of Thermal Control Coatings in Satellite Radiators [Volume 2, Issue 1, 2018, Pages 35-44]

  • Farahani, Mohammad Production of a New Generation of Supersonic BusinessJets (SSBJ), Re-experience of Speed and Time Saving [Volume 1, Issue 3, 2018, Pages 49-60]

  • Farhid, Morteza Implementation of LDUT-based redundancy and frame structure management in CAN bus space applications [Volume 8, Issue 1, 2024, Pages 67-77]

  • Farhid, Morteza Robust model predictive control for satellite orbit maintenance using Hall effect thrusters [(Articles in Press)]

  • Farsi, Mohammad Ali Multistate UAV system reliability modelling and analysis with a random mission plan [Volume 7, Issue 3, 2023, Pages 1-12]

  • Fathi, Navab Effect of MAPO and T313 on the Rheological and Mechanical Properties of Composite Solid Propellant Based on HTPB [Volume 3, Issue 3, 2019, Pages 1-8]

  • Fathi, Navvab Effect of DBTDL Cure Catalyst on Mechanical and Ballistic Properties of a Composite Igniter [Volume 4, Issue 1, 2020, Pages 1-6]

  • Fazilati, Jamshid Preliminary performance study and technology demonstrator of UAV toroidal propellers [(Articles in Press)]

  • Foroutan, Ali Design of robust sliding mode controller for nonlinear chaotic gyroscope system with input saturation [(Articles in Press)]

  • Fouladi, Nematollah The Statistical Analysis of Gas Ejectors in High Altitude Test Facilities for Space Motors [Volume 2, Issue 2, 2018, Pages 25-34]

  • Fozouni Taloki, Iman Optimal Path Planning for Autonomous Space Maneuvers Based on Reinforcement Q-learning and Cubic Network [Volume 6, Issue 2, 2022, Pages 1-10]

G

  • Garivani, Mahdi Analysis, Design and Development of a Mini Jet Turbocharged Engine for Use in a Thermotronic Laboratory [Volume 3, Issue 1, 2019, Pages 1-11]

  • Ghaderi, A. Design of a Mobile-based Flying Robots [Volume 6, Issue 1, 2022, Pages 7-15]

  • Ghaderi, Fatemeh Formation control of unmanned helicopters using the sliding mode controller method [Volume 7, Issue 4, 2024, Pages 11-21]

  • Ghafari, Bijan An Overview of Aluminum Nitride (AlN) Based VUV Detectors in Space Applications [Volume 4, Issue 1, 2020, Pages 55-63]

  • Ghaffari, Valiollah Improved Guidance Law Design in Presence of Actuator Dynamic via Back-stepping Approach [Volume 4, Issue 2, 2020, Pages 10-1]

  • Ghaffari, Valiollah Performance Improvement of Guidance System, Using Lateral Thrusters [Volume 3, Issue 2, 2019, Pages 59-69]

  • Ghanbari Motlagh, Ahmad Conceptual Design of a Navigation CubeSat for Local Positioning System (Iran Region), Based on COTS Approach [Volume 4, Issue 3, 2020, Pages 13-1]

  • Ghanbarpour, Hamed Analytical Study of Mutual Inductance for Arbitrary Positioned Planar Spiral Inductors for Airborne Electromagnetic Systems Applications [(Articles in Press)]

  • Ghanifar, Mana Intelligent Tuning PID Controller, Simulation and Comparison for a Quadrotor [Volume 7, Issue 4, 2024, Pages 23-33]

  • Ghasemi, Reza Formation control of unmanned helicopters using the sliding mode controller method [Volume 7, Issue 4, 2024, Pages 11-21]

  • Ghasemi, Sharareh Van Allen Radiation Belts: An Important Challenge for Astrobiology Missions [Volume 4, Issue 3, 2020, Pages 33-25]

  • Ghasemi, Sharareh Futurology in Astrobotany and Future Space Travels [Volume 4, Issue 4, 2021, Pages 1-9]

  • Ghasemi, Sharareh Effects of Gravitational and Radiate Stresses on Plants Growth for Space Travels [Volume 2, Issue 4, 2019, Pages 1-5]

  • Ghasemi, Sharareh Reducing the Prevalence of Coronavirus (COVID-19) in Airlines Based on and the Reinforcement Artificial Intelligence [Volume 6, Issue 3, 2022, Pages 1-10]

  • Ghashochi-Bargh, Hadi Frequency Analysis of Variable Stiffness Fiber-Metal Plates with Simply Supported Edges in the Longitudinal Direction under Thermal Load using Semi - Analytical Finite Strip Method [Volume 6, Issue 4, 2023, Pages 57-68]

  • Ghavami Masouleh, Maryam Sadat Application and Introduction of Ceramic Nanocomposites [Volume 2, Issue 4, 2019, Pages 7-16]

  • Gholami, Mahdi Assessment of Socio-economic Impacts of Investments in Space Industry [Volume 4, Issue 1, 2020, Pages 35-44]

  • Gholamian, Reza Development process of aircraft turbine engine control systems [Volume 6, Issue 3, 2022, Pages 45-55]

  • Ghorashi, Seyed Alireza Investigation and Comparison of MEMS-based Micro-propulsions for Small Satellites [Volume 2, Issue 3, 2019, Pages 43-52]

  • Ghorbanian, Kaveh Design and Fabrication of a Reflected-Type Shock Tube for Experimental Investigations on Combustion Kinetics [Volume 3, Issue 3, 2019, Pages 31-38]

  • Ghorbanifar, Shahram Basics and Concepts Modern CFD (LBM) [Volume 1, Issue 1, 2017, Pages 11-18]

  • Ghorbanifar, Shahram Three-Dimensional Lbm Simulation of Oscillations of a Pendent ‎Growing Drop‎ [Volume 5, Issue 1, 2021, Pages 67-77]

  • Ghouchi Eskandar, hamid Adaptive Modified Sliding-Mode-based Attitude Control of a Satellite Under Reaction Wheel Fault [Volume 8, Issue 3, 2024, Pages 33-46]

  • Goharain, Seyyedeh Kokab The formation of respiratory droplets caused by breathing, coughing, and sneezing in patients with Covid-19 and the role of wearing a mask in controlling its spread [Volume 5, Issue 3, 2021, Pages 37-47]

H

  • Hadavian, Sajedeh Fabrication of Epoxy-date Fiber Composite with the Aim of Improving Mechanical Properties [Volume 5, Issue 3, 2021, Pages 21-36]

  • Haghgoo, Majid Space Adhesives: Fundamentals, Preparation, and Impact of Space Environment [Volume 5, Issue 4, 2022, Pages 73-88]

  • Hajebrahimi, Zahra 3-D Clinostat for Microgravity Simulation in Cellular and Molecular Studies [Volume 1, Issue 2, 2017, Pages 27-33]

  • Hajebrahimi, Zahra Astronauts and Space Food [Volume 1, Issue 3, 2018, Pages 31-40]

  • Hajialigol, Saeed Investigation and Comparison of MEMS-based Micro-propulsions for Small Satellites [Volume 2, Issue 3, 2019, Pages 43-52]

  • Hajialigol, Saeed A Review of New Technologies in Passive Thermal Control for CubeSats [Volume 5, Issue 4, 2022, Pages 11-21]

  • Haji Babaee Taheri, Zeynab Investigation of Thermal Control Methods in Small Scale Satellites [Volume 5, Issue 4, 2022, Pages 23-34]

  • Hajizadeh, Ali The Effect of Thermal Barrier Coating on the Thermal Performance of a Gas Turbine Blade [(Articles in Press)]

  • Hamidzadeh Delarzi, Zahra Investigation of DME/DME as an Appropriate Backup for GNSS Systems in Iranian Airports [Volume 4, Issue 2, 2020, Pages 80-65]

  • Hamzehpour, M. Design of a Mobile-based Flying Robots [Volume 6, Issue 1, 2022, Pages 7-15]

  • Hamzeyee, Jamila Using Neural Network to Estimate the Success Percent of Spacecraft Active Fault-Tolerant Controller [Volume 7, Issue 2, 2023, Pages 11-16]

  • Harbi Monfared, Reza Morphing Wings- A Novel Design in Aviation Industry [Volume 4, Issue 4, 2021, Pages 66-55]

  • Harbi Monfared, Reza Aerodynamic/Aeroacoustic Numerical Simulation and Manufaturing of a Sample Morphing Wing in Twisted Mode [Volume 7, Issue 2, 2023, Pages 1-9]

  • Hasanlou, Mahdi Construction of Non-metric Camera Calibration Station for Use in Unmanned Aerial Vehicles (UAV's) [Volume 3, Issue 4, 2020, Pages 45-56]

  • Hashemi, Mir Yoseph The Effect of Thermal Barrier Coating on the Thermal Performance of a Gas Turbine Blade [(Articles in Press)]

  • Hashemi Mahneh, Seyyed Hamed Optimal Control Approach to Soft Landing [Volume 1, Issue 1, 2017, Pages 53-59]

  • Hashemzadeh, Gholam Reza A review of studies on air-breathing turbine engines from an energy–exergy viewpoint [Volume 7, Issue 3, 2023, Pages 49-67]

  • Hassanpour, Halimeh Effect of Microgravity on Nucleolar Protein Contents and Regulation of Plant Cell Division [Volume 4, Issue 4, 2021, Pages 19-11]

  • Hassanpour, Halimeh Plant Growth Chamber for Space Studies [Volume 1, Issue 2, 2017, Pages 45-53]

  • Hassanpour, Halimeh Optimization of Lightning System for Plant Growth in Life Support System [Volume 3, Issue 1, 2019, Pages 21-29]

  • Hassanpour, Halimeh Study of Cellular and Molecular Responses in Plants under Microgravity [Volume 3, Issue 4, 2020, Pages 57-65]

  • Hassanpour, Halimeh Effect of Space Environmental Stresses on DNA Damage and Stress Response Mechanisms in Plants [Volume 6, Issue 1, 2022, Pages 1-6]

  • Hassanpour, Halimeh Investigation of plant cell culture models for space studies [Volume 7, Issue 1, 2023, Pages 17-23]

  • Hassanpour, Halimeh Designing an optical system for plant research in space [Volume 7, Issue 4, 2024, Pages 51-58]

  • Hassanpour, Halimeh Plant Research in Space Shuttle and its Challenges [(Articles in Press)]

  • Hatam, Majid Challenges of Inertial and Integrated Navigation Systems in Synthetic Aperture Radar Application [Volume 4, Issue 3, 2020, Pages 24-15]

  • Hatami Nasab, Mohsen The Statistical Analysis of Gas Ejectors in High Altitude Test Facilities for Space Motors [Volume 2, Issue 2, 2018, Pages 25-34]

  • Heidari-Semiromi, Ebrahim Influence of anisotropic plasma antenna parameters on scattering pattern and radar cross section [Volume 6, Issue 3, 2022, Pages 11-20]

  • Hejazi zade, Alireza Methods for Attenuation of Helicopter [Volume 7, Issue 3, 2023, Pages 69-84]

  • Herfat, Sobhan Use of Solid Fuel Ramjet Technology in the New Generation of Artillery Shells [Volume 7, Issue 2, 2023, Pages 49-58]

  • Heydari Beni, Mohsen Fabrication of Epoxy-date Fiber Composite with the Aim of Improving Mechanical Properties [Volume 5, Issue 3, 2021, Pages 21-36]

  • Heydari Beni, Mohsen Optimization of Milling Process Parameters of Carbon/Epoxy Composite Material for Minimizing Surface Roughness [Volume 5, Issue 4, 2022, Pages 35-59]

  • Heydari Beni, Mohsen Evaluation of Kidane Approximate Model in Free Vibration Analysis of Grid Stiffened Composite Plates with Different Boundary Conditions [Volume 6, Issue 1, 2022, Pages 29-44]

  • Heydari Beni, Mohsen Free vibration analysis of cylindrical sandwich shells with FML face and functionally graded core using a new shell theory [Volume 7, Issue 4, 2024, Pages 35-49]

  • Heydari Beni, Mohsen Fabrication and Investigation of Mechanical Properties Aluminum Composite Foam Reinforced with Silicon Carbide Prticles [(Articles in Press)]

  • Hosseini, seyed Amir Analysis of the Combustion Process in the Engine Zamstic [Volume 1, Issue 2, 2017, Pages 35-44]

  • Hosseini, Seyed Majid Two-Level Optimal Controller Design Based on PSO and Adaptive Control for Satellite Simulator System [(Articles in Press)]

  • Hosseinzadeh alqoo, Sajjad The Role of Thrusters in Space Systems [Volume 3, Issue 4, 2020, Pages 11-24]

I

  • Imani, Maryam Target Detection System Design for Domestic Areas in Iran: Case Study in Abadan and Ahvaz, Using Satellite Multi-spectral Images of Landsat 8 and Sentinel 2 [Volume 4, Issue 3, 2020, Pages 45-63]

  • Isavand, Hassan Unsteady Aerodynamic Analysis of Airfoils and Aircraft Wings to Gust Inlet Function [Volume 5, Issue 4, 2022, Pages 1-10]

J

  • Jabbaripour, Behzad A Numerical Solution of a Circular Section Made of Functionally Graded Material (FGM) under a Transverse Load, with a Simple Support on the Radial Edges [Volume 3, Issue 1, 2019, Pages 31-40]

  • Jafari Nadoushan, Mahdi Challenges of Asteroid Mining from Techno-economic and Legal Points of View [Volume 5, Issue 1, 2021, Pages 1-13]

  • Jafarpanah, Mostafa Conceptual Design of a Navigation CubeSat for Local Positioning System (Iran Region), Based on COTS Approach [Volume 4, Issue 3, 2020, Pages 13-1]

  • Jalali chimeh, Sayyed Alireza Statistical Analysis of Mass-Energy Parameters of Multi-stage and Clustered Liquid Propellant Engines [Volume 3, Issue 3, 2019, Pages 9-14]

  • Jalalvand, Meysam Numerical Simulation of Helicopter Pilot Seat under Crash Impact [(Articles in Press)]

  • Janalipour, Milad Monitoring the Quality of Water BodiesUsing Satellite and Aerialand satellite imagery Remote Sensing Imagery (Concepts, Methods and New Approaches) [Volume 2, Issue 3, 2019, Pages 1-11]

  • Jelokhani Niaraki, mohammad Experimental Investigation on High cycle Fatigue Behavior of Al6061/SiC composite Fabricated by Friction Stir Processing [Volume 7, Issue 4, 2024, Pages 1-10]

  • Jelokhani Niaraki, Mohammad A Numerical Solution of a Circular Section Made of Functionally Graded Material (FGM) under a Transverse Load, with a Simple Support on the Radial Edges [Volume 3, Issue 1, 2019, Pages 31-40]

  • Jelokhani Niaraki, Mohammad Experimental Investigation on low cycle Fatigue Behavior of Al6061/SiC composite Fabricated by Friction Stir Processing [Volume 7, Issue 1, 2023, Pages 35-43]

K

  • Kafashan, Jalal Unmanned Aerial Vehicles Without Combustion Engine Technical Parameters and Challenges [Volume 6, Issue 3, 2022, Pages 57-69]

  • Kahe, G Design of a Mobile-based Flying Robots [Volume 6, Issue 1, 2022, Pages 7-15]

  • Kahe, Ghasem Design and Optimization of Two- stage AC/DC Power Supply Based on Increasing Reliability for Aircraft Power Supply [Volume 7, Issue 2, 2023, Pages 17-28]

  • Kamali, Seyed Mohammad Investigating the effect of wear on the creepage life of jet engine turbine blades model 250-C20 [(Articles in Press)]

  • Kamzan, Milad Intelligent Tuning PID Controller, Simulation and Comparison for a Quadrotor [Volume 7, Issue 4, 2024, Pages 23-33]

  • Karami, Ramin An Algorithm, Based on Extreme Machine Learning, for Modeling Rate of Material Transfer in EDC Process [Volume 3, Issue 3, 2019, Pages 23-30]

  • Karami Horestani, Ali Transparent Antenna Technology and Its Application in Space [Volume 4, Issue 2, 2020, Pages 44-35]

  • Karami Horestani, Ali Design of Compact Filters with Asymmetrical Response Based on Dual-mode Resonators for Satellite Communications [Volume 6, Issue 2, 2022, Pages 11-21]

  • Karami Khorramabadi, Mahdi Experimental and analytical investigation of impact strength of functionally graded epoxy/graphene nanocomposite [Volume 8, Issue 2, 2024, Pages 45-54]

  • Kargarnajafi, Amir Conceptual Design of the Spacecraft Attitude Control Based on the Plane Displacement of the Propulsion System [Volume 2, Issue 4, 2019, Pages 27-35]

  • Karimaei, Hadiseh Making Catalyst and Preparing Catalyst Bed for Hydrazine Decomposition in Low-Thrust Monopropellant Thrusters [Volume 2, Issue 1, 2018, Pages 17-25]

  • Karimi, N. Design of a Mobile-based Flying Robots [Volume 6, Issue 1, 2022, Pages 7-15]

  • Kashani, Mahmood Introducing Methods of Thrust Vector Control (TVC) System in Supersonic Aircraft [Volume 2, Issue 4, 2019, Pages 17-26]

  • Kasiri, Ali Drag Sail Conceptual Design for Satellite Orbit Reduction in Low Earth Orbit [Volume 5, Issue 1, 2021, Pages 29-43]

  • Kaveh, Amir A Review of Satellite Thermal Simulation Facilities in The Environmental Conditions of Earth's Orbits for Composite Structures [Volume 8, Issue 1, 2024, Pages 79-95]

  • Kavousfar, Saeed Study of the Effect of Air Suction on Separation Bubble in a Flow Field around a Rectangular Cylinder [Volume 4, Issue 2, 2020, Pages 34-27]

  • Kazemi, Hamid Challenges and Opportunities of Drone Development in Iran [Volume 4, Issue 2, 2020, Pages 64-45]

  • Kazemi, Mohsen Investigation of DME/DME as an Appropriate Backup for GNSS Systems in Iranian Airports [Volume 4, Issue 2, 2020, Pages 80-65]

  • Kazemi, Mohsen Investigation of FRTO Module from a PBN Approach with Navigation Perspective [Volume 3, Issue 4, 2020, Pages 25-34]

  • Khalilnejad, Mohammad Study of the effects of wind on aircraft landing and take-off safety [Volume 5, Issue 3, 2021, Pages 49-56]

  • Khodabakhsh, A. H. Modeling and Simulation of Nonlinear Dynamics Using Physics-Informed Deep Neural Networks [Volume 6, Issue 4, 2023, Pages 25-36]

  • Khodayari, Hamidreza A Review on the Applications of Chemical Reactor Network via Computational Fluid Dynamics Hybrid Method in Order to Predict the Pollutant Emissions [Volume 2, Issue 2, 2018, Pages 11-23]

  • Khoshniyat, Hamed Investigation of Ground Effect on the Beamforming of the Glide Path Altitude Adjustment Navigation System [Volume 5, Issue 3, 2021, Pages 57-65]

  • Kourosdari, Negin Transparent Antenna Technology and Its Application in Space [Volume 4, Issue 2, 2020, Pages 44-35]

L

  • Leyci, Sorayya An Overview of Modeling, Stability, and Control of Flapping Robots [Volume 4, Issue 3, 2020, Pages 65-76]

  • Livani, Mostafa Numerical Simulation of Helicopter Pilot Seat under Crash Impact [(Articles in Press)]

  • Livani, Mostafa Investigating the effect of wear on the creepage life of jet engine turbine blades model 250-C20 [(Articles in Press)]

M

  • Maboodi, Reza Flutter analysis of a CNT-reinforced composite beam carrying an attached mass in the supersonic flow [Volume 7, Issue 1, 2023, Pages 57-67]

  • Mahdavy-Moghaddam, Hossein Simulation of the Bypass Dual Throat Nozzle and investigation of parameters affecting the change of thrust vector angle [Volume 7, Issue 1, 2023, Pages 25-33]

  • Mahdiyari, Mohammad Sajjad Star Trackers Evaluation by Statistical Analysis [Volume 8, Issue 1, 2024, Pages 41-66]

  • Mahdizadeh Rokhi, Masoud Investigation of the Effect of Polymer and Aluminum Foams on the Collapse Behavior of Double-walled Thin-walled Steel Cone Structures [Volume 6, Issue 2, 2022, Pages 55-69]

  • Mahmoodi, Ali Futurology in Astrobotany and Future Space Travels [Volume 4, Issue 4, 2021, Pages 1-9]

  • Mahmoodi, Ali Investigation of Changes in Structural Simulation of Three-axis Gyroscopic Stabilizer [Volume 5, Issue 3, 2021, Pages 1-19]

  • Mahmoodi, Mostafa The Introduction of Multi-Stage Turbocharger Systems used in Unmanned High-Altitude Flight [Volume 2, Issue 1, 2018, Pages 9-15]

  • Mahmoodi, Mostafa Methods for Preliminary Estimation of Turbofan Engine Weight [Volume 2, Issue 2, 2018, Pages 35-45]

  • Mahmoodi, Mostafa Introducing Methods of Thrust Vector Control (TVC) System in Supersonic Aircraft [Volume 2, Issue 4, 2019, Pages 17-26]

  • Mahmoodi, Mostafa Methods for Attenuation of Unmanned Aerial Vehicle Noise [Volume 6, Issue 2, 2022, Pages 71-83]

  • Mahmoudi, Milad Optimal Technology Allocation of in the Life Support Subsystem with Maximum Reliability [Volume 7, Issue 2, 2023, Pages 29-37]

  • Makarem, Hadi Challenges of Inertial and Integrated Navigation Systems in Synthetic Aperture Radar Application [Volume 4, Issue 3, 2020, Pages 24-15]

  • Malaek, Seyed Mohammad Bagher Review of Bilevel Optimization Approaches and Applications in Aerospace Engineering [Volume 4, Issue 2, 2020, Pages 26-11]

  • Malekipour, Shahed Experimental Hypersonic Aerodynamics and Advances in Aerospace Engineering [Volume 1, Issue 1, 2017, Pages 1-10]

  • Malekzade-Fard, K. Effect of Airfoil Wavy Surface on Aero Dynamic Coefficients [Volume 1, Issue 3, 2018, Pages 41-47]

  • Manourizadeh, Farhad Investigation of Effect of Rheological Behavior of Gelled Propellant on Atomization Characteristics of Swirl Injector [Volume 5, Issue 2, 2021, Pages 43-56]

  • Maraki, Moohamadreza An Algorithm, Based on Extreme Machine Learning, for Modeling Rate of Material Transfer in EDC Process [Volume 3, Issue 3, 2019, Pages 23-30]

  • Matdani, Amir Study of Emitted Sound of a Gas Turbine Model Combustor When Flame Adheres to Burner Head [Volume 5, Issue 1, 2021, Pages 57-65]

  • Mirahmadi, S. Javid A Review on Space Solar Arrays [Volume 7, Issue 4, 2024, Pages 59-70]

  • Mir Mazhari Anvar, Samira Implementation of LDUT-based redundancy and frame structure management in CAN bus space applications [Volume 8, Issue 1, 2024, Pages 67-77]

  • Mirshams, Mehran Communication Space Bus in GEO [Volume 4, Issue 4, 2021, Pages 43-53]

  • Mirzaee, Ali Optimal Path Planning for Autonomous Space Maneuvers Based on Reinforcement Q-learning and Cubic Network [Volume 6, Issue 2, 2022, Pages 1-10]

  • Mirzaee Kahagh, Ali Frequency Analysis of Variable Stiffness Fiber-Metal Plates with Simply Supported Edges in the Longitudinal Direction under Thermal Load using Semi - Analytical Finite Strip Method [Volume 6, Issue 4, 2023, Pages 57-68]

  • Mirzaei,, Ata Ollah Analytical Study of Mutual Inductance for Arbitrary Positioned Planar Spiral Inductors for Airborne Electromagnetic Systems Applications [(Articles in Press)]

  • Moaddab, Hoda Review of Bilevel Optimization Approaches and Applications in Aerospace Engineering [Volume 4, Issue 2, 2020, Pages 26-11]

  • Moayyedi, Mohammad Kazem Numerical Simulation of Flow Field around Space Reentry Capsule and Studying the Effects of Angle of Attack Variations on Flow Structure [Volume 3, Issue 1, 2019, Pages 13-19]

  • Moayyedi, Mohammad Kazem Numerical Simulation of Unsteady Flow and Calculation of Heat Transfer Coefficient inside the Solid Fuel Engine Shell [Volume 8, Issue 1, 2024, Pages 27-39]

  • Moazzami, Fahemeh Effect of Airfoil Wavy Surface on Aero Dynamic Coefficients [Volume 1, Issue 3, 2018, Pages 41-47]

  • Moghaddas, Hamid Reza Investigation of Changes in Structural Simulation of Three-axis Gyroscopic Stabilizer [Volume 5, Issue 3, 2021, Pages 1-19]

  • Moghimi Esfandabadi, Mohamad hossein Investigating selected methods to improve aerodynamic coefficients and better performance of UAV [Volume 8, Issue 3, 2024, Pages 1-16]

  • Moghimi Esfandabadi, Mohammad hossein Design and optimization of the wing fence of a lambda-shaped aircraft model to reduce the rolling moment coefficient [Volume 8, Issue 2, 2024, Pages 13-25]

  • Mohammadkhani, Hasan Performance Improvement of Guidance System, Using Lateral Thrusters [Volume 3, Issue 2, 2019, Pages 59-69]

  • Mohammadzadeh Sadigh, Sevil Adaptive Modified Sliding-Mode-based Attitude Control of a Satellite Under Reaction Wheel Fault [Volume 8, Issue 3, 2024, Pages 33-46]

  • Mohmmad Mirzaie, Ahmad Numerical Simulation of Flow Field around Space Reentry Capsule and Studying the Effects of Angle of Attack Variations on Flow Structure [Volume 3, Issue 1, 2019, Pages 13-19]

  • Mollaei, Ahmad Effect of DBTDL Cure Catalyst on Mechanical and Ballistic Properties of a Composite Igniter [Volume 4, Issue 1, 2020, Pages 1-6]

  • Moradi, Ali Methods for Attenuation of Unmanned Aerial Vehicle Noise [Volume 6, Issue 2, 2022, Pages 71-83]

  • Moradi, Ali Methods for Attenuation of Helicopter [Volume 7, Issue 3, 2023, Pages 69-84]

  • Moradi, Babak Unsteady Aerodynamic Analysis of Airfoils and Aircraft Wings to Gust Inlet Function [Volume 5, Issue 4, 2022, Pages 1-10]

  • Moradi, Rouzbeh Using Neural Network to Estimate the Success Percent of Spacecraft Active Fault-Tolerant Controller [Volume 7, Issue 2, 2023, Pages 11-16]

  • Moradi, Samad Vibration Suppression of a Maneuvering Flexible Spacecraft with Actuator Dynamic [Volume 5, Issue 1, 2021, Pages 45-56]

  • Mostofi, Nikrouz Construction of Non-metric Camera Calibration Station for Use in Unmanned Aerial Vehicles (UAV's) [Volume 3, Issue 4, 2020, Pages 45-56]

  • Mousavi, Fateme History of Plant Exploration Scientific Missions: Goals and Technologies [Volume 5, Issue 2, 2021, Pages 1-9]

  • Mousavi, Fateme Plants and Graviperception [Volume 2, Issue 4, 2019, Pages 37-42]

  • Mousavi, Fateme Effects of Simulated Microgravity on Pollen Germination and Growth of Lily [Volume 3, Issue 2, 2019, Pages 53-58]

  • Mousavi, Fateme Anaerobic Photosynthesizers and their Potential to Create a Biosphere on the Surface of the Red Planet [Volume 7, Issue 2, 2023, Pages 39-47]

  • Mousavi, Fatemeh Plant Growth Chamber for Space Studies [Volume 1, Issue 2, 2017, Pages 45-53]

  • Mousavi Nodoushan, Seyed Amanollah Effect of MAPO and T313 on the Rheological and Mechanical Properties of Composite Solid Propellant Based on HTPB [Volume 3, Issue 3, 2019, Pages 1-8]

N

  • Naderi Nezhad, Mehdi Numerical Calculation Of Aerodynamic Loads Of Helicopter Rotor Using CFD / BET Method [Volume 6, Issue 4, 2023, Pages 13-24]

  • Nadjafi, Mohammad Modeling Reliability of UAV by Markov Method [Volume 6, Issue 4, 2023, Pages 1-12]

  • Najafi, Asghar Analysis of sound propagation in the horn considering nonlinear effects [Volume 6, Issue 4, 2023, Pages 37-45]

  • Najibi, Amir Investigation of the Effect of Polymer and Aluminum Foams on the Collapse Behavior of Double-walled Thin-walled Steel Cone Structures [Volume 6, Issue 2, 2022, Pages 55-69]

  • Narimani, razieh conceptual design of store and forward payload for LEO satellite [Volume 8, Issue 3, 2024, Pages 63-74]

  • Naseh, Hassan Conceptual Design of a Navigation CubeSat for Local Positioning System (Iran Region), Based on COTS Approach [Volume 4, Issue 3, 2020, Pages 13-1]

  • Naseh, Hassan Technology Development Trend in Space Launch System Propulsion [Volume 1, Issue 1, 2017, Pages 19-29]

  • Naseh, Hassan New Approaches in U.S. Space Launch System’s Technology Development based on SUSTAIN Programm [Volume 2, Issue 2, 2018, Pages 47-52]

  • Nasresfahani, Mohamad Reza A Review on Space Solar Arrays [Volume 7, Issue 4, 2024, Pages 59-70]

  • Navabi, M. Automatic Mass Balancing of Spacecraft Attitude Simulator by Parameter Estimation and Linear Control [Volume 8, Issue 2, 2024, Pages 55-65]

  • Nazari, Mohammad Mahdi Investigation of the effect of parameters of a nonlinear dynamic absorber on reducing the vibration amplitude of a nonlinear system [Volume 7, Issue 1, 2023, Pages 45-55]

  • Nazari, Mohsen Simulation of the Aerodynamic Performance of a Symmetrical Airfoil Using Dissipative Dynamic Particle Method [Volume 6, Issue 2, 2022, Pages 23-39]

  • Nazari Karadeh, Alireza Introduction to Space Debris Capturing Methods [Volume 7, Issue 1, 2023, Pages 1-16]

  • Nazemi Zade, mostafa Linear Optimal Control of an Aerial Vehicle by Utilizing the Dynamic Model of Propulsion System and Velocity Feedback [Volume 3, Issue 4, 2020, Pages 35-44]

  • Nekofar, koros Astronauts and Space Food [Volume 1, Issue 3, 2018, Pages 31-40]

  • Nekoufar, Kouros Investigation of Magnetohydrodynamics Technology and It's Application in Tension Drain [Volume 3, Issue 4, 2020, Pages 1-10]

  • Neyzan Hosseini, Amir Mohammad Simulation of the Bypass Dual Throat Nozzle and investigation of parameters affecting the change of thrust vector angle [Volume 7, Issue 1, 2023, Pages 25-33]

  • Nikaein, Sanaz Development and Validation of a Conceptual Design Algorithm for Expander Cycle Engines [Volume 4, Issue 3, 2020, Pages 35-43]

  • Nikfar, Maryam Urban Growth Prediction using Sentinel Satellite Images by Neural Network Method [Volume 2, Issue 3, 2019, Pages 13-22]

  • Nikkhoo, amirfarhang Effect of amplitude and wavelength of the sinusoidal leading edge of the tubercled wing in post-stall condition [Volume 6, Issue 4, 2023, Pages 47-56]

  • Nikzadfar, Kamyar Analysis, Design and Development of a Mini Jet Turbocharged Engine for Use in a Thermotronic Laboratory [Volume 3, Issue 1, 2019, Pages 1-11]

  • Nobakhti, Mohamadhasan Improving the Aerodynamic Performance of Radial Gas Microturbine with Double Curvature Blades [Volume 4, Issue 4, 2021, Pages 21-30]

  • Norouzian alam, Shahab An Overview of Aluminum Nitride (AlN) Based VUV Detectors in Space Applications [Volume 4, Issue 1, 2020, Pages 55-63]

  • Nosratollahi, Mehran A preliminary study to investigate the use of Advanced Air Mobility in Iran [Volume 7, Issue 3, 2023, Pages 37-48]

  • Nosratollahi, Mehran Star Trackers Evaluation by Statistical Analysis [Volume 8, Issue 1, 2024, Pages 41-66]

  • Nouri, Seyed Mehdi Design and Optimization of Two- stage AC/DC Power Supply Based on Increasing Reliability for Aircraft Power Supply [Volume 7, Issue 2, 2023, Pages 17-28]

  • Nourianpour, Mohammad Amin A review of the application of optimization algorithms nature inspired in the design of flight paths [Volume 8, Issue 3, 2024, Pages 75-99]

O

  • Ommi, Fathollah Numerical Study of Transverse Injection into Supersonic flow of the Scramjet Combustor [Volume 2, Issue 1, 2018, Pages 1-8]

  • Ommi, Fathollah A Review on the Applications of Chemical Reactor Network via Computational Fluid Dynamics Hybrid Method in Order to Predict the Pollutant Emissions [Volume 2, Issue 2, 2018, Pages 11-23]

  • Ommi, Fathollah An Investigation of Vertical Take-off and Landing Air Taxis with Electric and Hybrid Propulsion Systems [Volume 2, Issue 3, 2019, Pages 31-42]

  • Ommi, Fathollah Investigation of Magnetohydrodynamics Technology and It's Application in Tension Drain [Volume 3, Issue 4, 2020, Pages 1-10]

P

  • Parhizkar, Hamid Methods for Attenuation of Helicopter [Volume 7, Issue 3, 2023, Pages 69-84]

  • Pasandide-Fard, M. Effect of Airfoil Wavy Surface on Aero Dynamic Coefficients [Volume 1, Issue 3, 2018, Pages 41-47]

  • Pazooki, Farshad Investigation of Changes in Structural Simulation of Three-axis Gyroscopic Stabilizer [Volume 5, Issue 3, 2021, Pages 1-19]

  • Pazooki, Farshad Optimal Technology Allocation of in the Life Support Subsystem with Maximum Reliability [Volume 7, Issue 2, 2023, Pages 29-37]

  • Pirkandi, Jamasb Scramjets and Their Role in the Future of Aerospace Propulsion Systems [Volume 2, Issue 2, 2018, Pages 1-10]

  • Pirkandi, Jamasb A Review of Studies on Ramjet and Scramjet Engines from an Energy–exergy Viewpoint [Volume 5, Issue 3, 2021, Pages 67-79]

  • Pirkandi, Jamasb Investigation of Thermal Control Methods in Small Scale Satellites [Volume 5, Issue 4, 2022, Pages 23-34]

  • Pourfeiz, Alireza Endless Runway Design: A New Horizon in the Development of the Aviation Industry [Volume 5, Issue 2, 2021, Pages 57-69]

  • Pourhabibian, Roghayeh Optimization of Lightning System for Plant Growth in Life Support System [Volume 3, Issue 1, 2019, Pages 21-29]

  • Pourhabibian, Roghayeh Study of Cellular and Molecular Responses in Plants under Microgravity [Volume 3, Issue 4, 2020, Pages 57-65]

  • Pourtakdoust, Seid Hosein Modeling and Simulation of Nonlinear Dynamics Using Physics-Informed Deep Neural Networks [Volume 6, Issue 4, 2023, Pages 25-36]

Q

  • Qotbseyfi, Mohammad The Implementation of Concurrent Engineering in Space Projects [Volume 3, Issue 2, 2019, Pages 11-22]

R

  • Raee, Jalal Modeling Reliability of UAV by Markov Method [Volume 6, Issue 4, 2023, Pages 1-12]

  • Raeisi Estabragh, Ehsan Analysis of Large Deflection of Nanobeams with Circular Cross Section under Distributed Load Taking into Surface Effects [Volume 7, Issue 3, 2023, Pages 25-35]

  • Rahi, Abbas Investigation of the effect of parameters of a nonlinear dynamic absorber on reducing the vibration amplitude of a nonlinear system [Volume 7, Issue 1, 2023, Pages 45-55]

  • Ramesh, Davood Development and Validation of a Conceptual Design Algorithm for Expander Cycle Engines [Volume 4, Issue 3, 2020, Pages 35-43]

  • Ramezani, Saeed A model for equipment deterioration prediction in aviation industry using deep learning methods (case study: airplane turbofan engine) [Volume 8, Issue 2, 2024, Pages 1-12]

  • Rashtian, Mohammad Investigation of DME/DME as an Appropriate Backup for GNSS Systems in Iranian Airports [Volume 4, Issue 2, 2020, Pages 80-65]

  • Razmjooei, Mohammad Investigation of Calculation Methods for Convective Heat Transfer Coefficient in Combustion Chambers and in Converging-Diverging Nozzles [Volume 3, Issue 3, 2019, Pages 39-50]

  • Razmjooei, Mohammad Effects of Blowing Correction Factor on Convection Heat Transfer Coefficient in Thermal Insulators Modeling [Volume 5, Issue 1, 2021, Pages 15-28]

  • Rezaei, Ali Analysis, Design and Development of a Mini Jet Turbocharged Engine for Use in a Thermotronic Laboratory [Volume 3, Issue 1, 2019, Pages 1-11]

  • Roshanian, Jafar Model Predictive Control Based on Intelligent Model for Low Earth Orbit Satellite [Volume 4, Issue 4, 2021, Pages 31-41]

  • Rostami, Amir Study of the Effect of Air Suction on Separation Bubble in a Flow Field around a Rectangular Cylinder [Volume 4, Issue 2, 2020, Pages 34-27]

S

  • Saadatdar Arani, Seyyed Ali A preliminary study to investigate the use of Advanced Air Mobility in Iran [Volume 7, Issue 3, 2023, Pages 37-48]

  • Saberi moghaddam, Ali Investigation of Different Types of Reflective Multilayer Insulators (MLI) in Cryogenic Tanks [Volume 4, Issue 1, 2020, Pages 23-34]

  • Saberi moghaddam, Ali Investigation of Effect of Rheological Behavior of Gelled Propellant on Atomization Characteristics of Swirl Injector [Volume 5, Issue 2, 2021, Pages 43-56]

  • Saberi Tavakkoli, Mohammad Modeling and Simulation of a Ballistic Launch Vehicle in ECEF and Navigation Coordinate Systems [Volume 1, Issue 2, 2017, Pages 17-26]

  • Sabohi, Zaheer Investigation of Calculation Methods for Convective Heat Transfer Coefficient in Combustion Chambers and in Converging-Diverging Nozzles [Volume 3, Issue 3, 2019, Pages 39-50]

  • Sabohi, Zaheer Effects of Blowing Correction Factor on Convection Heat Transfer Coefficient in Thermal Insulators Modeling [Volume 5, Issue 1, 2021, Pages 15-28]

  • Saboohi, Zoheir A Review on the Applications of Chemical Reactor Network via Computational Fluid Dynamics Hybrid Method in Order to Predict the Pollutant Emissions [Volume 2, Issue 2, 2018, Pages 11-23]

  • Saboohi, Zoheir An Investigation of Vertical Take-off and Landing Air Taxis with Electric and Hybrid Propulsion Systems [Volume 2, Issue 3, 2019, Pages 31-42]

  • Sabzehparvar, Mehdi Automatic Mass Balancing of Spacecraft Attitude Simulator by Parameter Estimation and Linear Control [Volume 8, Issue 2, 2024, Pages 55-65]

  • Sadati, Hossein Evaluation of Multidisciplinary Design Optimization of Air Taxi and Classic Design [Volume 7, Issue 3, 2023, Pages 13-24]

  • Sadati, seyed hosein Integrated guidance and control of the Pitch channel in a homing missile using optimal linear and nonlinear model predictive control [Volume 8, Issue 2, 2024, Pages 27-43]

  • Sadati, seyed hosein Air target tracking by homing missile using deep learning and fuzzy adaptive control [(Articles in Press)]

  • Sadeghi, Mahyar Reducing the Prevalence of Coronavirus (COVID-19) in Airlines Based on and the Reinforcement Artificial Intelligence [Volume 6, Issue 3, 2022, Pages 1-10]

  • Safa, Alireza Design of robust sliding mode controller for nonlinear chaotic gyroscope system with input saturation [(Articles in Press)]

  • Safarzadeh, Reza Futurology in Astrobotany and Future Space Travels [Volume 4, Issue 4, 2021, Pages 1-9]

  • Saharkhiz, Sahar Analysis and identification of the flow pattern in a specific high-pressure axial turbine in off-design conditions [Volume 8, Issue 3, 2024, Pages 47-61]

  • Sahranavardfard, Nasrin Conceptual Design of a Navigation CubeSat for Local Positioning System (Iran Region), Based on COTS Approach [Volume 4, Issue 3, 2020, Pages 13-1]

  • Salavatifar, Maryam An Overview of Changes in Immune System in Space and Microgravity Conditions [Volume 1, Issue 3, 2018, Pages 1-10]

  • Salavatifar, Maryam Monitoring the Quality of Water BodiesUsing Satellite and Aerialand satellite imagery Remote Sensing Imagery (Concepts, Methods and New Approaches) [Volume 2, Issue 3, 2019, Pages 1-11]

  • Salehi, Mehdi Implementation of Ground Vibration Test (GVT) on Large Aircrafts [Volume 4, Issue 1, 2020, Pages 45-54]

  • Salehi, Mehdi An Overview of the Research on Flight Flutter Testing [Volume 1, Issue 3, 2018, Pages 17-30]

  • Salehnezhad, Masoud Investigation of the Effect of Polymer and Aluminum Foams on the Collapse Behavior of Double-walled Thin-walled Steel Cone Structures [Volume 6, Issue 2, 2022, Pages 55-69]

  • Salimi, Mohammad Reza Making Catalyst and Preparing Catalyst Bed for Hydrazine Decomposition in Low-Thrust Monopropellant Thrusters [Volume 2, Issue 1, 2018, Pages 17-25]

  • Saliminezhad, Farkhondeh Investigation and Comparison of MEMS-based Micro-propulsions for Small Satellites [Volume 2, Issue 3, 2019, Pages 43-52]

  • Sedighy, Seyd hassan An Overview of Aluminum Nitride (AlN) Based VUV Detectors in Space Applications [Volume 4, Issue 1, 2020, Pages 55-63]

  • Sekhavat Benis, Alireza Optimal Path Planning for Autonomous Space Maneuvers Based on Reinforcement Q-learning and Cubic Network [Volume 6, Issue 2, 2022, Pages 1-10]

  • Setayandeh, Mohammad reza Optimization of an Unmanned Aerial Vehicle Using Fuzzy Logic and Multidisciplinary Design Optimization [Volume 5, Issue 2, 2021, Pages 29-41]

  • Shadravan, Mohsen Introducing Methods of Thrust Vector Control (TVC) System in Supersonic Aircraft [Volume 2, Issue 4, 2019, Pages 17-26]

  • Shafieenejad, Iman Van Allen Radiation Belts: An Important Challenge for Astrobiology Missions [Volume 4, Issue 3, 2020, Pages 33-25]

  • Shafieenejad, Iman Futurology in Astrobotany and Future Space Travels [Volume 4, Issue 4, 2021, Pages 1-9]

  • Shafieenejad, Iman Effects of Gravitational and Radiate Stresses on Plants Growth for Space Travels [Volume 2, Issue 4, 2019, Pages 1-5]

  • Shafieenejad, Iman Optimal Path Planning for Autonomous Space Maneuvers Based on Reinforcement Q-learning and Cubic Network [Volume 6, Issue 2, 2022, Pages 1-10]

  • Shafieenejad, Iman Reducing the Prevalence of Coronavirus (COVID-19) in Airlines Based on and the Reinforcement Artificial Intelligence [Volume 6, Issue 3, 2022, Pages 1-10]

  • Shafieenejad, Iman A review of the application of optimization algorithms nature inspired in the design of flight paths [Volume 8, Issue 3, 2024, Pages 75-99]

  • Shahi Ashtiani, Mohammad Ali Autonomous Orbit Control: A New Approach in LEO Satellites [Volume 1, Issue 1, 2017, Pages 43-52]

  • Shahmardan, Mohammad Mohsen Simulation of the Aerodynamic Performance of a Symmetrical Airfoil Using Dissipative Dynamic Particle Method [Volume 6, Issue 2, 2022, Pages 23-39]

  • Shameli, Moharram Implementation of LDUT-based redundancy and frame structure management in CAN bus space applications [Volume 8, Issue 1, 2024, Pages 67-77]

  • Shameli, Moharram Adaptive Modified Sliding-Mode-based Attitude Control of a Satellite Under Reaction Wheel Fault [Volume 8, Issue 3, 2024, Pages 33-46]

  • Shameli, Moharram Robust model predictive control for satellite orbit maintenance using Hall effect thrusters [(Articles in Press)]

  • Shariati, Mahmoud Investigation of the Effect of Polymer and Aluminum Foams on the Collapse Behavior of Double-walled Thin-walled Steel Cone Structures [Volume 6, Issue 2, 2022, Pages 55-69]

  • Shaterian, Zahra Transparent Antenna Technology and Its Application in Space [Volume 4, Issue 2, 2020, Pages 44-35]

  • Shaterian, Zahra Design of Compact Filters with Asymmetrical Response Based on Dual-mode Resonators for Satellite Communications [Volume 6, Issue 2, 2022, Pages 11-21]

  • Sheikhbahaee, Hamed A Review of New Technologies in Passive Thermal Control for CubeSats [Volume 5, Issue 4, 2022, Pages 11-21]

  • Sheikhbahaei, Hamed Investigation and Comparison of MEMS-based Micro-propulsions for Small Satellites [Volume 2, Issue 3, 2019, Pages 43-52]

  • Sheikh hasani, Hamed Effect of MAPO and T313 on the Rheological and Mechanical Properties of Composite Solid Propellant Based on HTPB [Volume 3, Issue 3, 2019, Pages 1-8]

  • Shokri khanghah, Rojin Drag Sail Conceptual Design for Satellite Orbit Reduction in Low Earth Orbit [Volume 5, Issue 1, 2021, Pages 29-43]

  • Shokrolahi, Pourya An Overview of the Importance, Challenges, and Methods of Orbital Rendezvous and Docking [Volume 6, Issue 2, 2022, Pages 41-54]

  • Shokrollahi, Hassan Flutter analysis of a CNT-reinforced composite beam carrying an attached mass in the supersonic flow [Volume 7, Issue 1, 2023, Pages 57-67]

  • Siami Araghi, Mohammmad Optimal Path Planning for Autonomous Space Maneuvers Based on Reinforcement Q-learning and Cubic Network [Volume 6, Issue 2, 2022, Pages 1-10]

  • Siami Araghi, Mohammmad Reducing the Prevalence of Coronavirus (COVID-19) in Airlines Based on and the Reinforcement Artificial Intelligence [Volume 6, Issue 3, 2022, Pages 1-10]

  • Soltanali, Hamzeh A model for equipment deterioration prediction in aviation industry using deep learning methods (case study: airplane turbofan engine) [Volume 8, Issue 2, 2024, Pages 1-12]

  • Sotoodeh, Mohammad Javad Effect of DBTDL Cure Catalyst on Mechanical and Ballistic Properties of a Composite Igniter [Volume 4, Issue 1, 2020, Pages 1-6]

T

  • Tabibian, Shima Probe Robots in the Red Planet [Volume 2, Issue 2, 2018, Pages 53-62]

  • Taei, Hojat Robust H∞ Control Design for Thrust Vectoring System of a UAV [Volume 6, Issue 1, 2022, Pages 17-28]

  • Taeibi Rahni, M. Three-Dimensional Lbm Simulation of Oscillations of a Pendent ‎Growing Drop‎ [Volume 5, Issue 1, 2021, Pages 67-77]

  • Taeibi Rahni, Mohamad Morphing Wings- A Novel Design in Aviation Industry [Volume 4, Issue 4, 2021, Pages 66-55]

  • Taeibi Rahni, Mohammad The formation of respiratory droplets caused by breathing, coughing, and sneezing in patients with Covid-19 and the role of wearing a mask in controlling its spread [Volume 5, Issue 3, 2021, Pages 37-47]

  • Taeibi Rahni, Mohammad Aerodynamic/Aeroacoustic Numerical Simulation and Manufaturing of a Sample Morphing Wing in Twisted Mode [Volume 7, Issue 2, 2023, Pages 1-9]

  • Tagimalek, Hadi An Algorithm, Based on Extreme Machine Learning, for Modeling Rate of Material Transfer in EDC Process [Volume 3, Issue 3, 2019, Pages 23-30]

  • Tahayori, Soroush Performance Improvement of Guidance System, Using Lateral Thrusters [Volume 3, Issue 2, 2019, Pages 59-69]

  • Taie, Hojat Development process of aircraft turbine engine control systems [Volume 6, Issue 3, 2022, Pages 45-55]

  • Taii, Hojjat Autonomous Orbit Control: A New Approach in LEO Satellites [Volume 1, Issue 1, 2017, Pages 43-52]

  • Talafi Noghani, Mahmoud Electromagnetic Compatibility in Space Systems (Part I) [Volume 4, Issue 1, 2020, Pages 7-22]

  • Talebi Motlagh, Narges Adaptive Modified Sliding-Mode-based Attitude Control of a Satellite Under Reaction Wheel Fault [Volume 8, Issue 3, 2024, Pages 33-46]

  • Taleghani, Arash Scramjets and Their Role in the Future of Aerospace Propulsion Systems [Volume 2, Issue 2, 2018, Pages 1-10]

  • Tarhani, Saeed Experimental and analytical investigation of impact strength of functionally graded epoxy/graphene nanocomposite [Volume 8, Issue 2, 2024, Pages 45-54]

  • Tavakkoli, Hadi Analytical Study of Mutual Inductance for Arbitrary Positioned Planar Spiral Inductors for Airborne Electromagnetic Systems Applications [(Articles in Press)]

  • Tayefi, Morteza Intelligent Tuning PID Controller, Simulation and Comparison for a Quadrotor [Volume 7, Issue 4, 2024, Pages 23-33]

  • Tayefi, Morteza Emerging Applications and Challenges of Multi-Rotor Systems: A Comprehensive Review [Volume 8, Issue 2, 2024, Pages 67-82]

  • Tiregar, Andisheh Analysis of the Combustion Process in the Engine Zamstic [Volume 1, Issue 2, 2017, Pages 35-44]

  • Toloei, Alireza Formation control of unmanned helicopters using the sliding mode controller method [Volume 7, Issue 4, 2024, Pages 11-21]

  • Toloei, Alireza Designing Pitch Angle Compensator for an UAV and Robustification it with Bee Colony Optimization Algorithm [Volume 8, Issue 1, 2024, Pages 1-14]

Y

  • Yadollahi, Esmaeil Simulation of Electro-osmotic Micro Pump Using Dissipative Particle Dynamics [Volume 3, Issue 2, 2019, Pages 1-9]

  • Yaghoi, Reza Two-Level Optimal Controller Design Based on PSO and Adaptive Control for Satellite Simulator System [(Articles in Press)]

  • Yasini, Taha Model Predictive Control Based on Intelligent Model for Low Earth Orbit Satellite [Volume 4, Issue 4, 2021, Pages 31-41]

  • Yazdannik, Saman Emerging Applications and Challenges of Multi-Rotor Systems: A Comprehensive Review [Volume 8, Issue 2, 2024, Pages 67-82]

  • Yousefpour, Ali Improved Guidance Law Design in Presence of Actuator Dynamic via Back-stepping Approach [Volume 4, Issue 2, 2020, Pages 10-1]

Z

  • Zabihi, Amir H. Analysis, Design and Development of a Mini Jet Turbocharged Engine for Use in a Thermotronic Laboratory [Volume 3, Issue 1, 2019, Pages 1-11]

  • Zahedzadeh, Mostafa Numerical Study of Transverse Injection into Supersonic flow of the Scramjet Combustor [Volume 2, Issue 1, 2018, Pages 1-8]

  • Zahmatkesh, Mohammadreza Fabrication and Investigation of Mechanical Properties Aluminum Composite Foam Reinforced with Silicon Carbide Prticles [(Articles in Press)]

  • Zakeri, Mahnaz Scramjets and Their Role in the Future of Aerospace Propulsion Systems [Volume 2, Issue 2, 2018, Pages 1-10]

  • Zakeri, Ramin Simulation of Electro-osmotic Micro Pump Using Dissipative Particle Dynamics [Volume 3, Issue 2, 2019, Pages 1-9]

  • Zakeri, Ramin Simulation of Aerodynamic Properties of Rarefied Gas Flow on Satellite Panel by DSMC Method [Volume 6, Issue 1, 2022, Pages 45-52]

  • Zakeri, Ramin Simulation of the Aerodynamic Performance of a Symmetrical Airfoil Using Dissipative Dynamic Particle Method [Volume 6, Issue 2, 2022, Pages 23-39]

  • Zakeri, Ramin Design and fabrication of smart small airfoil using surface deformation and experimental study of aerodynamic properties [Volume 8, Issue 1, 2024, Pages 15-25]

  • Zardashti, Reza Star Trackers Evaluation by Statistical Analysis [Volume 8, Issue 1, 2024, Pages 41-66]

  • Zareh, M. Three-Dimensional Lbm Simulation of Oscillations of a Pendent ‎Growing Drop‎ [Volume 5, Issue 1, 2021, Pages 67-77]

  • Zareh, Masoud Morphing Wings- A Novel Design in Aviation Industry [Volume 4, Issue 4, 2021, Pages 66-55]

  • Zareh, Masoud Aerodynamic/Aeroacoustic Numerical Simulation and Manufaturing of a Sample Morphing Wing in Twisted Mode [Volume 7, Issue 2, 2023, Pages 1-9]

  • Zarei, Hamid Reza Numerical Simulation of Helicopter Pilot Seat under Crash Impact [(Articles in Press)]

  • Zarei, Hamid Reza Investigating the effect of wear on the creepage life of jet engine turbine blades model 250-C20 [(Articles in Press)]

  • Zolfi, AliReza A Review of Studies on Ramjet and Scramjet Engines from an Energy–exergy Viewpoint [Volume 5, Issue 3, 2021, Pages 67-79]

  • Zolfi, AliReza A review of studies on air-breathing turbine engines from an energy–exergy viewpoint [Volume 7, Issue 3, 2023, Pages 49-67]