Document Type : Scientific extension

Author

M. Sc., Faculty of Aerospace Engineering, Semnan University، Semnan، Iran

Abstract

A composite is commonly defined as a combination of two or more distinct materials, to create a new material with properties that cannot be achieved by any of the components acting alone. The growing use of composites for structural applications has made a thorough understanding of the behavior of composite joints in various applications. Joints are critical elements in composite due to their stress concentration. Composite joint is one of the most important part of structure. There are different types of joint, each of them has its own pros and cons and use in various applications and environments.

Keywords

[1] Javidfar, F., Mahmoodi, A., Mirkhani, H., Analysis and Design of Composite Strucrures, Cultural Publishing Ayah Foundation, 2003.
[2] Stuart Milne (2014) Nanocomposites in Aerospace, Available at: https://www.azonano.com/article.aspx? ArticleID=3258 (Accessed: ).
[3] Jawed, A., “Presentation on Composite,” Available: [on Line]: https://www.slideshare.net/aqibjawed/composites-60981354(Accessed), 2016.
[4] Veinthal, Renno. “Application of Materials,” Available: [on line], https://www.ttu.ee/public/s/ Sustainable_Energetics/materials/Applications_of_Materials/Application_of_Materials-Veinthal.pdf
[5] Mohseni Shakib, M., “Analysis & Design of laminate composite structures,” Imam Hossein University, 1993.
[6] Puchała, K., Szymczyk, E. and Jachimowicz, J., “About Mechanical Joints Design in Metal-Composite Structure,” Journal of KONES, Vol.19, 2012, pp. 381-390.
[7] Asgari Mehrabadi, F., Fracture Analysis in Adhesive Composite Material/Aluminum Joints, (Thesis M. Sc.), Tabriz University, 2011.
[8] Soliman, G.N., Adhesive Overlap Joints, Master of Engineering (Hons.) thesis, Department of Civil and Mining Engineering, University of Wollongong, 1995. http://ro.uow.edu.au/theses/2417
[9] Composite Joining and Joints, Available, [on Line]: www.cirmib.ing.unitn.it/Compositi/textbookCOMP/19.pdf (Accessed: ).
[10] Alaattin, A. and Husnu Dirikolu, M., “The effect of stacking sequence of carbon epoxy composite laminates on pinned-joint strength,” Composite Structures, Vol. 62, No. 1 , 2003, pp. 107-111.
[11] Majid, M., Afendi, M., Lieh, W. and Hafizan, K., “Strength of Composites Hybrid Joint” ARPN Journal of Engineering and Applied Sciences, Vol. 11, No. 1, 2016, pp. 216-221.