[1] A. O. Mirzaei, M. Asadi, H. Ghanbarpour, A. M. Abazari, and H. Tavakkoli, "Mutual inductance calculations of non-identical n-sided planar coils with arbitrary geometry and spatial orientations,"
European Physical Journal Plus, vol. 138, no. 9, 2023, Art. no. 869,
https://doi.org/10.1140/epjp/s13360-023-04493-1.
[2] M. Asadi, R. Ahmadi, and A. M. Abazari, "Footstep-powered floor tile: design and evaluation of an electromagnetic frequency up-converted energy harvesting system enhanced by a cylindrical halbach array,"
Sustainable Energy Technologies and Assessments, vol. 60, 2023, Art. no. 103571,
https://doi.org/10.1016/j.seta.2023.103571.
[3] G. Chitnis and B. Ziaie, "A ferrofluid-based wireless pressure sensor,"
Journal of Micromechanics and Microengineering, vol. 23, no. 12, 2013, Art. no. 125031,
https://doi.org/10.1088/0960-1317/23/12/125031.
[4] D. Marioli, E. Sardini, and M. Serpelloni, "An inductive telemetric measurement system for humidity sensing,"
Measurement Science and Technology, vol. 19, no. 11, 2008, Art. no. 115204,
https://doi.org/10.1088/0957-0233/19/11/115204.
[5] M. B. Coskun, K. Thotahewa, Y. S. Ying, M. Yuce, A. Neild, and T. Alan, "Nanoscale displacement sensing using microfabricated variable-inductance planar coils,"
Applied Physics Letters, vol. 103, no. 14, 2013, Art. no. 143501,
https://doi.org/10.1063/1.4823828.
[6] R. Matsuzaki and A. Todoroki, "Wireless flexible capacitive sensor based on ultra-flexible epoxy resin for strain measurement of automobile tires,"
Sensors and Actuators A: Physical, vol. 140, no. 1, pp. 32–42, 2007,
https://doi.org/10.1016/j.sna.2007.06.014.
[7] Q. Tan
et al., "A harsh environment-oriented wireless passive temperature sensor realized by ltcc technology,"
Sensors, vol. 14, no. 3, pp. 4154–4166, 2014,
https://doi.org/10.3390/s140304154.
[8] A. Hassanvand, A. M. Abazari, R. Moradi, and A. Shafee, "Thermal effects of the nonuniform magnetic force on nanofluid stream along the convergent tube: A computational study,"
International Journal of Modern Physics B, vol. 34, no. 28, 2020, Art. no. 2050264,
https://doi.org/10.1142/S0217979220502641.
[9] T. D. Manh, A. M. Abazari, M. Barzegar Gerdroodbary, N. D. Nam, R. Moradi, and H. Babazadeh, "Computational simulation of variable magnetic force on heat characteristics of backward-facing step flow,"
Journal of Thermal Analysis and Calorimetry, vol. 144, no. 4, pp. 1585–1596, 2021,
https://doi.org/10.1007/s10973-020-09608-9.
[10] Y. M. Chu, R. Moradi, and A. M. Abazari, "Computational investigation of non-uniform magnetic field on thermal characteristic of nanofluid stream inside 180
∘ elbow pipe,"
Modern Physics Letters B, vol. 35, no. 09, 2021, Art. no. 2150157,
https://doi.org/10.1142/S0217984921501578.
[11] Y. M. Chu, R. Moradi, A. M. Abazari, and Q. V. Bach, "Effect of nonuniform magnetic field on thermal performance of nanofluid flow in angled junction,"
International Journal of Modern Physics C, vol. 32, no. 01, 2021, Art. no. 2150001,
https://doi.org/10.1142/S0129183121500017.
[12] G. Pan and L. Wang, "Swallowable wireless capsule endoscopy: progress and technical challenges,"
Gastroenterology Research and Practice vol. 2012, no. 1, 2011, Art. no. 841691, pp. 1–9, 2012,
https://doi.org/10.1155/2012/841691.
[13] J. P. Fernández, B. Barrowes, K. O’Neill, I. Shamatava, and F. Shubitidze, "Toward a real-time positioning system for a portable EMI Sensor," in
SPIE 8709, Detection and Sensing of Mines, Explosive Objects, and Obscured Targets XVIII, Baltimore, Maryland, United States, 2013, Paper 870902,
https://doi.org/10.1117/12.2016245.
[14] D. Ban, D. Zarko, and I. Mandic, "Turbogenerator end winding leakage inductance calculation using a 3-D analytical approach based on the solution of Neumann integrals," in
International Electric Machines and Drives Conference, Madison, WI, USA, 2003, pp. 1576-1582, vol. 3,
https://doi.org/10.1109/IEMDC.2003.1210661.
[15] F. W. Grover, Inductance Calculations, New York: Company D. Van Nostrand, Van Nostrand Company, 1946.
[16] S. Raju, R. Wu, M. Chan, and C. P. Yue, "Modeling of mutual coupling between planar inductors in wireless power applications,"
IEEE Transactions on Power Electronics, vol. 29, no. 1, pp. 481–490, 2014,
https://doi.org/10.1109/TPEL.2013.2253334.
[17] Y. Cheng and Y. Shu, "A new analytical calculation of the mutual inductance of the coaxial spiral rectangular coils,"
IEEE Transactions on Magnetics, vol. 50, no. 4, pp. 1–6, 2014, Art. no. 7026806,
https://doi.org/10.1109/TMAG.2013.2290972.
[18] H. Greenhouse, "Design of planar rectangular microelectronic inductors,"
IEEE Transactions on Parts, Hybrids, and Packaging, vol. 10, no. 2, pp. 101–109, 1974,
https://doi.org/10.1109/TPHP.1974.1134841.
[19] C. L. W. Sonntag, E. A. Lomonova, and J. L. Duarte, "Implementation of the Neumann formula for calculating the mutual inductance between planar PCB inductors," in
18th International Conference on Electrical Machines, Vilamoura, Portugal, 2008, pp. 1–6.
https://doi.org/10.1109/ICELMACH.2008.4799978.
[20] J. Acero, C. Carretero, I. Lope, R. Alonso, O. Lucia, and J. M. Burdio, "Analysis of the mutual inductance of planar-lumped inductive power transfer systems,"
IEEE Transactions on Industrial Electronics, vol. 60, no. 1, pp. 410–420, 2013,
https://doi.org/10.1109/TIE.2011.2164772.
[21] O. Akar, T. Akin, and K. Najafi, "A wireless batch sealed absolute capacitive pressure sensor,"
Sensors and Actuators A: Physical, vol. 95, no. 1, pp. 29–38, 2001,
https://doi.org/10.1016/S0924-4247(01)00753-1.
[22] Y. Ji, H. Wang, J. Lin, S. Guan, X. Feng, and S. Li, "The mutual inductance calculation between circular and quadrilateral coils at arbitrary attitudes using a rotation matrix for airborne transient electromagnetic systems,"
Journal of Applied Geophysics, vol. 111, pp. 211–219, 2014,
https://doi.org/10.1016/j.jappgeo.2014.10.003.
[23] H. Tavakkoli, E. Abbaspour-Sani, A. Khalilzadegan, G. Rezazadeh, and A. Khoei, "Analytical study of mutual inductance of hexagonal and octagonal spiral planer coils,"
Sensors and Actuators A: Physical, vol. 247, pp. 53–64, 2016,
https://doi.org/10.1016/j.sna.2016.04.065.
[24] D. C. Jolly, "Identity of the Ampere and Biot-Savart electromagnetic force laws,"
Physics Letters A, vol. 107, no. 5, pp. 231–234, 1985,
https://doi.org/10.1016/0375-9601(85)90589-4.
[25] K. B. Kim, E. Levi, Z. Zabar, and L. Birenbaum, "Mutual inductance of noncoaxial circular coils with constant current density,"
IEEE Transactions on Magnetics, vol. 33, no. 5, pp. 4303–4309, 1997,
https://doi.org/10.1109/20.620439.
[26] C. Akyel, S. I. Babic, and M. M. Mahmoudi, "Mutual inductance calculation for non-coaxial circular air coils with parallel axes,"
Electromagnetics Research, vol. 91, pp. 287–301, 2009,
https://doi.org/10.2528/PIER09021907.
[27] S. Babic, F. Sirois, C. Akyel, and C. Girardi, "Mutual inductance calculation between circular filaments arbitrarily positioned in space: alternative to grover’s formula,"
IEEE Transactions on Magnetics, vol. 46, no. 9, pp. 3591–3600 2010,
https://doi.org/10.1109/TMAG.2010.2047651.
[28] W. Dehui, S. Qisheng, W. Xiaohong, and Y. Fan, "Analytical model of mutual coupling between rectangular spiral coils with lateral misalignment for wireless power applications,"
IET Power Electronics, vol. 11, no. 5, pp. 781–786, 2018,
https://doi.org/10.1049/iet-pel.2017.0470.
[29] Z. Luo and X. Wei, "Analysis of square and circular planar spiral coils in wireless power transfer system for electric vehicles,"
IEEE Transactions on Industrial Electronics, vol. 65, no. 1, pp. 331–341, 2018,
https://doi.org/10.1109/TIE.2017.2723867.
[30] E. Aydin, Y. Kosesoy, E. Yildiriz, and M. Timur Aydemir, "Comparison of hexagonal and square coils for use in wireless charging of electric vehicle battery," in
International Symposium on Electronics and Telecommunications (ISETC), Timisoara, Romania, 2018, pp. 1–4.
https://doi.org/10.1109/ISETC.2018.8583925.
[31] X. Liu and S. Y. R. Hui, "Equivalent circuit modeling of a multilayer planar winding array structure for use in a universal contactless battery charging platform,"
IEEE Transactions on Power Electronics, vol. 22, no. 1, pp. 21–29, 2007,
https://doi.org/10.1109/TPEL.2006.886655.
[32] B. Lee, D. Ahn, and M. Ghovanloo, "Three-phase time-multiplexed planar power transmission to distributed implants,"
IEEE Journal of Emerging and Selected Topics in Power Electronics (JESTPE), vol. 4, no. 1, pp. 263–272, 2016,
https://doi.org/10.1109/JESTPE.2015.2436391.
[33] U.-M. Jow and M. Ghovanloo, "Geometrical design of a scalable overlapping planar spiral coil array to generate a homogeneous magnetic field,"
IEEE Transactions on Magnetics, vol. 49, no. 6, pp. 2933–2945, 2013,
https://doi.org/10.1109/TMAG.2012.2235181.
[34] M. Alizadeh Pahlevani and I. Soltani, "Wireless power transfer in coupled links: coil misalignment model for electric cars," Journal of Applied Electromagnetics and Mechanics, vol. 3, no. 4, pp. 9–18, 2016 (in Persian).
[35] C. R. Paul,
Inductance: Loop and Partial, John Wiley & Sons, 2009.
https://doi.org/10.1002/9780470561232.
[36] H. Tavakkoli, E. Abbaspour-Sani, A. Khalilzadegan, A. M. Abazari, and G. Rezazadeh, "Mutual inductance calculation between two coaxial planar spiral coils with an arbitrary number of sides,"
Microelectronics Journal, vol. 85, pp. 98–108, 2019,
https://doi.org/10.1016/j.mejo.2019.01.012.
[37] R. Rodriguez, J. Dishman, F. Dickens, and E. Whelan, "Modeling of two-dimensional spiral inductors,"
IEEE Transactions on Components, Hybrids, and Manufacturing Technology, vol. 3, no. 4, pp. 535–541, 1980,
https://doi.org/10.1109/TCHMT.1980.1135651.
[38] W. A. Roshen and D. E. Turcotte, "Planar inductors on magnetic substrates,"
IEEE Transactions on Magnetics, vol. 24, no. 6, pp. 3213–3216, 1988,
https://doi.org/10.1109/20.92379.
[39] Y. P. Su, Xun Liu, and S. Y. R. Hui, "Mutual inductance calculation of movable planar coils on parallel surfaces,"
IEEE Transactions on Power Electronics, vol. 24, no. 4, pp. 1115–1123, 2009,
https://doi.org/10.1109/TPEL.2008.2009757.
