[1] T. E. Noll
et al., "Technical findings, lessons learned, and recommendations resulting from the helios prototype vehicle mishap," in
NATO/RTO AVT-145 Workshop on Design Concepts, Processes and Criteria for UAV Structural Integrity, USA, 2007. Available:
http://ntrs.nasa.gov/citations/20070022260.
[2] R. R. Ratnakar
et al., "Hydrogen supply chain and challenges in large-scale LH2 storage and transportation,"
International Journal of Hydrogen Energy, vol. 46, no. 47, pp. 24149-24168, 2021,
http://doi.org/10.1016/j.ijhydene.2021.05.025.
[3] G. Abumeri, D. Kosareo, and J. Roche, "Cryogenic composite tank design for next generation launch technology," in
40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2004, Paper 3390,
http://doi.org/10.2514/6.2004-3390.
[4] K. D. Timmerhaus, "Advances in Cryogenic Engineering [electronic resource]: Proceeding of the 1970 Cryogenic Engineering Conference," University of Colorado Boulder, Colorado, Boston, MA : Springer, 1970,
http://doi.org/10.1007/978-1-4757-0244-6.
[5] T. F. Johnson, D. W. Sleight, and R. A. Martin, "Structures and design phase I summary for the NASA composite cryotank technology demonstration project," in
54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2013, Paper 1825,
http://doi.org/10.2514/6.2013-1825.
[6] S. Prasanraj, B. Sreejish, Y. Vincy Jarome, and K. P. Dhanabalakrishnan, "Advanced composite materials in cryogenic propellant tank," International Journal of Engineering Research and Technology, vol. 8, pp. 490-499, 2019.
[7] S. Ashraf, M. S. Chohan, S. Muhammad, and F. Khan, "Circular intuitionistic fuzzy TODIM approach for material selection for cryogenic storage tank for liquid nitrogen transportation,"
IEEE Access, vol. 11, pp. 98458–98468, 2023,
http://doi.org/10.1109/ACCESS.2023.3312568.
[8] A. P. Ustinova, Y. L. Siuskina, and R. A. Peshkov, "Evaluation of the possibility to use composite material in the structure of the rocket stage cryogenic conical tank,"
BMSTU Journal of Mechanical Engineering, no. 3 (756), pp. 90–100, 2023,
http://doi.org/10.18698/0536-1044-2023-3-90-100.
[9] Z. Wang, Y. Wang, S. Afshan, and J. Hjalmarsson, "A review of metallic tanks for H2 storage with a view to application in future green shipping,"
International Journal of Hydrogen Energy, vol. 46, no. 9, pp. 6151–6179, 2021,
http://doi.org/10.1016/j.ijhydene.2020.11.168.
[10] Q. Cheng, R. Zhang, Z. Shi, and J. Lin, "Review of common hydrogen storage tanks and current manufacturing methods for aluminium alloy tank liners,"
International Journal of Lightweight Materials and Manufacture, vol. 7, no. 2, pp. 269–284, 2024,
http://doi.org/10.1016/j.ijlmm.2023.08.002.
[11] D. Chen
et al., "A review of the polymer for cryogenic application: Methods, mechanisms and perspectives,"
Polymers (Basel), vol. 13, no. 3, p. 320, 2021,
http://doi.org/10.3390/polym13030320.
[12] W. S. Park, S. W. Yoo, M. H. Kim, and J. M. Lee, "Strain-rate effects on the mechanical behavior of the AISI 300 series of austenitic stainless steel under cryogenic environments,"
Materials and Design, vol. 31, no. 8, pp. 3630-3640, 2010,
http://doi.org/10.1016/j.matdes.2010.02.041.
[13] R. McLellan and C. Harkins, "Hydrogen interactions with metals,"
Materials Science and Engineering, vol. 18, no. 1, pp. 5-35, 1975,
http://doi.org/10.1016/0025-5416(75)90069-5.
[14] B. Sun, D. Wang, X. Lu, D. Wan, D. Ponge, and X. Zhang, "Current challenges and opportunities toward understanding hydrogen embrittlement mechanisms in advanced high-strength steels: a review,"
Acta Metallurgica Sinica (English Letters), vol. 34, pp. 741-754, 2021,
http://doi.org/10.1007/s40195-021-01233-1.
[15] S. Prasanraj, "Advanced composite materials in cryogenic propellant tank,"
International Journal of Engineering Research and Technology, vol. 8, no. 12, 2019,
http://doi.org/10.17577/IJERTV8IS120284.
[16] D.-H. Lee, B. Sun, S. Lee, D. Ponge, E. A. Jägle, and D. Raabe, "Comparative study of hydrogen embrittlement resistance between additively and conventionally manufactured 304L austenitic stainless steels,"
Materials Science and Engineering: A, vol. 803, 2021, Art. no. 140499,
http://doi.org/10.1016/j.msea.2020.140499.
[17] L. R. Queiroga, G. F. Marcolino, M. Santos, G. Rodrigues, C. E. dos Santos, and P. Brito, "Influence of machining parameters on surface roughness and susceptibility to hydrogen embrittlement of austenitic stainless steels,"
International Journal of Hydrogen Energy, vol. 44, no. 54, pp. 29027-29033, 2019,
http://doi.org/10.1016/j.ijhydene.2019.09.139.
[18] X. Xiuqing, A. Junwei, W. Chen, and N. Jing, "Study on the hydrogen embrittlement susceptibility of AISI 321 stainless steel,"
Engineering Failure Analysis, vol. 122, 2021, Art. no. 105212,
http://doi.org/10.1016/j.engfailanal.2020.105212.
[19] P. Duthil, "Material properties at low temperature," arXiv preprint arXiv:1501.07100, 2015,
http://doi.org/10.48550/arXiv.1501.07100.
[20] Y. Qiu, H. Yang, L. Tong, and L. Wang, "Research progress of cryogenic materials for storage and transportation of liquid hydrogen,"
Metals, vol. 11, no. 7, 2021, Art. no. 1101,
http://doi.org/10.3390/met11071101.
[21] Q. Xiao, Y. Xie, F. Hu, and C. Hu, "Current status and trends of low-temperature steel used in polar regions,"
Materials, vol. 17, no. 13, 2024, Art. no. 3117,
http://doi.org/10.3390/ma17133117.
[22] A. K. Jha, S. N. Murty, V. Diwakar, and K. S. Kumar, "Metallurgical analysis of cracking in weldment of propellant tank," Engineering Failure Analysis, vol. 10, no. 3, pp. 265-273, 2003,
http://doi.org/10.1016/S1350-6307(02)00073-0.
[23] V. Viswanath, A. Asraff, P. Jayesh, S. M. Thomas, and R. Krishnakumar, "Structural integrity assessment of a propellant tank in presence of welding residual stresses,"
Procedia Structural Integrity, vol. 14, pp. 442-448, 2019,
http://doi.org/10.1016/j.prostr.2019.05.054.
[24]M. Jariyaboon, A. Davenport, R. Ambat, B. Connolly, S. Williams, and D. Price, "The effect of welding parameters on the corrosion behaviour of friction stir welded AA2024–T351,"
Corrosion Science, vol. 49, no. 2, pp. 877-909, 2007,
http://doi.org/10.1016/j.corsci.2006.05.038.
[25]A. K. Jha, P. R. Narayanan, K. Sreekumar, and P. Sinha, "Cracking of Al–4.5 Zn–1.5 Mg aluminium alloy propellant tank–A metallurgical investigation,"
Engineering Failure Analysis, vol. 17, no. 2, pp. 562-570, 2010,
http://doi.org/10.1016/j.engfailanal.2009.10.009.
[26]M. Moshtaghi, M. Safyari, and T. Hojo, "Effect of solution treatment temperature on grain boundary composition and environmental hydrogen embrittlement of an Al–Zn–Mg–Cu alloy,"
Vacuum, vol. 184, 2021, Art. no. 109937,
http://doi.org/10.1016/j.vacuum.2020.109937.
[27]Z. Liu, S. Xin, and Y. Zhao, "Research progress on the creep resistance of high-temperature titanium alloys: A review,"
Metals, vol. 13, no. 12, 2023, Art. no. 1975,
https://doi.org/10.3390/met13121975.
[28] H. E. Boyer, "Atlas of stress-strain curves," 1987, Available:https://books.google.com/books/about/Atlas_of_Stress_strain_Curves.html?id=up5KS9fd_pkC
[29] A. Xu, H. Wan, and C. Liang, "Application status and development trend of low temperature titanium alloy,"
Journal of Netshape Form Engineering, vol. 12, pp. 145-156, 2020,
https://doi.org/10.13228/j.boyuan.issn1001-0963.20130409.
[30] Y. Li, S. Li, and Q. Yu, "Research review on cutting temperature and cutting vibration of titanium alloy," in
MATEC Web of Conferences, vol. 353: EDP Sciences, 2021, Paper 01017,
https://doi.org/10.1051/matecconf/202135301017.
[31]G. Singh, G. Bajargan, R. Datta, and U. Ramamurty, "Deformation and strength of Ti–6Al–4V alloyed with B at cryogenic temperatures,"
Materials Science and Engineering: A, vol. 611, pp. 45-57, 2014,
https://doi.org/10.1016/j.msea.2014.05.075.
[32] Q. Sun and H. Gu, "Tensile and low-cycle fatigue behavior of commercially pure titanium and Ti–5Al–2.5 Sn alloy at 293 and 77 K,"
Materials Science and Engineering: A, vol. 316, no. 1-2, pp. 80-86, 2001,
https://doi.org/10.1016/S0921-5093(01)01249-7.
[33] A. Ghisi and S. Mariani, "Mechanical characterization of Ti–5Al–2.5 Sn ELI alloy at cryogenic and room temperatures,"
International Journal of Fracture, vol. 146, pp. 61-77, 2007,
https://doi.org/10.1007/s10704-007-9140-z.
[34] D. Verstraete, P. Hendrick, P. Pilidis, and K. Ramsden, "Hydrogen fuel tanks for subsonic transport aircraft,"
International Journal of Hydrogen Energy, vol. 35, no. 20, pp. 11085-11098, 2010,
https://doi.org/10.1016/j.ijhydene.2010.06.060.
[35] J. Schutz, "Properties of composite materials for cryogenic applications,"
Cryogenics, vol. 38, no. 1, pp. 3-12, 1998,
https://doi.org/10.1016/S0011-2275(97)00102-1.
[36] T. Horiuchi and T. Ooi, "Cryogenic properties of composite materials,"
Cryogenics, vol. 35, no. 11, pp. 677-679, 1995,
https://doi.org/10.1016/0011-2275(95)90887-L.
[37] O. Yano and H. Yamaoka, "Cryogenic properties of polymers,"
Progress in Polymer Science, vol. 20, no. 4, pp. 585-613, 1995,
https://doi.org/10.1016/0079-6700(95)00003-X.
[38] J. Hohe
et al., "Performance of fiber reinforced materials under cryogenic conditions—A review,"
Composites Part A: Applied Science and Manufacturing, vol. 141, 2021, Art. no. 106226,
https://doi.org/10.1016/j.compositesa.2020.106226.
[39] A. Slifka and D. Smith, "Thermal expansion of an E-glass/vinyl ester composite from 4 to 293 K,"
International Journal Of Thermophysics, vol. 18, pp. 1249-1256, 1997,
https://doi.org/10.1007/BF02575259.
[40] Z. Sápi and R. Butler, "Properties of cryogenic and low temperature composite materials–A review,"
Cryogenics, vol. 111, 2020, Art. no. 103190,
https://doi.org/10.1016/j.cryogenics.2020.103190.
[41] A. Gomez and H. Smith, "Liquid hydrogen fuel tanks for commercial aviation: Structural sizing and stress analysis,"
Aerospace Science and Technology, vol. 95, 2019, Art. no. 105438,
https://doi.org/10.1016/j.ast.2019.105438.
[42] R. Heydenreich, "Cryotanks in future vehicles,"
Cryogenics, vol. 38, no. 1, pp. 125-130, 1998,
https://doi.org/10.1016/S0011-2275(97)00122-7.
[43] M. Nachtane
et al., "An overview of the recent advances in composite materials and artificial intelligence for hydrogen storage vessels design,"
Journal of Composites Science, vol. 7, no. 3, 2023, Art. no. 119,
https://doi.org/10.3390/jcs7030119.
[44] J. Keyte, K. Pancholi, and J. Njuguna, "Recent developments in graphene oxide/epoxy carbon fiber-reinforced composites,"
Frontiers in materials, vol. 6, 2019, Art. no. 224,
https://doi.org/10.3389/fmats.2019.00224.
[45] K. Adeli, M. Nachtane, A. Faik, D. Saifaoui, and A. Boulezhar, "How green hydrogen and ammonia are revolutionizing the future of energy production: A comprehensive review of the latest developments and future prospects,"
Applied Sciences, vol. 13, no. 15, 2023, Art. no. 8711,
https://doi.org/10.3390/app13158711.
[46] F. Bickley and R. J. Schwinghamer, "NASA experience with the shuttle external tank," in National Manufacturing Week, Chicago, 1999.
[47] H. Yamakawa, K. Higuchi, T. Maruyama, and N. Kubota, "Flight evaluation of GN&C system and vertical landing dynamics of reusable rocket vehicle," in
10th AIAA/NAL-NASDA-ISAS International Space Planes and Hypersonic Systems and Technologies Conference, Kyoto, Japan, 2001, Paper 1907,
https://doi.org/10.2514/6.2001-1907.
[48] K. Higuchi
et al., "Development and flight test of metal-lined CFRP cryogenic tank for reusable rocket,"
Acta Astronautica, vol. 57, no. 2-8, pp. 432-437, 2005,
https://doi.org/10.1016/j.actaastro.2005.03.059.
[49] J. Guerrero, B. Hamilton, R. Burton, D. Crockett, and Z. Taylor, "Upper stage flight experiment (USFE) integral structure development effort,"
Composite Structures, vol. 66, no. 1–4. pp. 327–337, 2004,
https://doi.org/10.1016/j.compstruct.2004.04.069.
[50] K. Mallick
et al., "An integrated systematic approach to linerless composite tank development,"
Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, vol. 5. pp. 3553–3569, 2005,
https://doi.org/10.2514/6.2005-2089.
